[s-cars] crankshaft rebuild

[calvinlc@earthlink.net]

Buy a new one for the cost of turning????  So you can buy a new Audi crank
for less than $130?  You can't even buy the valve stem cap on an Audi for
that much, can you?
--Calvin


-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]On Behalf Of Emre Washburn
Sent: Thursday, November 03, 2005 6:22 PM
To: giannandrea at mindspring.com
Cc: s-car-list at audifans.com
Subject: Re: [s-cars] crankshaft rebuild


You should be able to buy a crankshaft, new, from Audi for less than
it would cost to turn the current shaft and buy oversize bearings.

If that is not an option, look around for a used unit. That's what I
did, about 25,000 high boosting miles ago.


--
Emre
92 //S4
90 Cq
40 valves 'O plenty!



On 11/3/05, David Giannandrea <giannandrea at mindspring.comt> wrote:
> I had a rod go out and it took the shine off the rod journal. Need to
> rebuild an AAN (5cyl, 20v, turbo) crankshaft.  Audi doesn't have anything
> but the stock bearing sizes.
>
> Any advice on who can do this work would be appreciated.
>
> David
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list