[s-cars] Fuel Pressure Regulator Replacement

[Mark Pollan]

Thank you Bill, Cody and Sean.  Easiest R&R on record to date.

 

Regards,

 

Mark

 

-----Original Message-----
From: Bill Mahoney [mailto:wmahoney at disk.com] 
Sent: Tuesday, October 04, 2005 12:52 PM
To: s-car-list at audifans.com
Cc: mark.pollan at mci.com
Subject: [s-cars] Fuel Pressure Regulator Replacement

 

Mark couldn't find it in Bentley so enquired~

Underneath the fuel rail cover right?  -yes
Bolted, screwed or pressure fit (o-ring) held in?  -large black C clip which
is easily removed with large flat screwdriver.but carefully ..and just pull
it out.
Do I need to release fuel pressure in the system prior to R&R or.? - no but
you will spill some gas so have some rags handy and a cool engine would be
good too.  If you pull out the old and are ready to press in the new
quickly, spillage should be minimal.
Anything else?  - There's also a metal clamp on the vacuum hose that can be
gently pried open and reused.
Try not to break anything else;)
 
HTH
Bill M