[s-cars] For Those of You Who have BIRA'ed
JenRob
jenrob at mchsi.com
Wed Oct 5 22:17:51 EDT 2005
i have tried two different street pads on my bira sys 3. IMHO do not
purchase the mintex red box pads, not very impressive. i have used the hawk
hp and hps pads. the hps being noisier, but better friction when heated up.
good place for repl rotors would be ecs tuning. - rob
----- Original Message -----
From: "Lino M. Valadas" <l.valadas at rogers.com>
To: "Taka Mizutani" <t44tqtro at gmail.com>; "Mesa Cycles"
<info at mesacycles.com>
Cc: <s-car-list at audifans.com>
Sent: Wednesday, October 05, 2005 8:14 PM
Subject: Re: [s-cars] For Those of You Who have BIRA'ed
> Ok, since we're on the subject of System 3 parts, I have a system in
> place
> on my S4 93 and will have to get new pads shortly. What are the best (non
> squealing) street pads for it?
>
> Some time down the road I will also need new rotors. Again who is the
> best
> source for those Euro A8's? The guy I got mine initially is totally
> unreliable and I don't want to go back there.
>
> TIA
>
> Lino
>
>
> ----- Original Message -----
> From: "Taka Mizutani" <t44tqtro at gmail.com>
> To: "Mesa Cycles" <info at mesacycles.com>
> Cc: <s-car-list at audifans.com>
> Sent: Saturday, October 01, 2005 10:38 PM
> Subject: Re: [s-cars] For Those of You Who have BIRA'ed
>
>
>> Russ-
>> Crescent City Motors used to be an excellent place to buy Porsche stuff,
> but
>> since
>> they are in New Orleans and the ownership changed, I think the deals went
>> away when
>> the ownership changed a year or two ago. Anyway, it's a moot point with
>> them- they're
>> probably not even open due to the hurricane.
>>
>> Sunset Imports in Oregon is pretty good- they charge something like 15%
> over
>> cost for
>> everything.
>>
>> I've had good luck with Clair Parts as well in Boston, make sure you
>> order
>> from Clair Parts,
>> not the regular dealership parts counter, there is a big difference in
> price
>> and you should
>> always ask for the "out of town" pricing just to make sure.
>>
>> Once in a while, your local dealer might have a good deal here and there
> as
>> well- someone
>> recently posted that Brandywine Porsche had a special on calipers,
>> they're
>> in my part of the
>> country, so you never know. A lot of Porsche dealers and parts houses
>> advertise in Panorama
>> (if you're a PCA member), Excellence (nearly the same as Panorama, better
>> articles IMHO),
>> as well as the less marque-oriented magazines- Grassroots Motorsports and
>> some other magazines
>> more geared toward motorsport can be good sources to find parts
>> suppliers.
>>
>> I think with the rise of the Euro and other circumstances, they're not
> going
>> to be very cheap-
>> I paid $270 or so each back when I got my calipers in '01.
>>
>> Taka
>>
>> On 10/1/05, Mesa Cycles <info at mesacycles.com> wrote:
>> >
>> > Who is a good source for new 996 or Boxter S calipers. Used would be
> fine
>> > too, but I haven't been able to track any down thus far. I'm looking to
>> > install a System 3 setup on my '93 Ur S4.
>> >
>> _______________________________________________
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
>> http://www.audifans.com/mailman/listinfo/s-car-list
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
More information about the S-CAR-List
mailing list