[s-cars] HSRSB install instructions? Re: Right/left threaded Heim joints/links for HSRSB

[Bill Clancy]

Does anyone happen to have the install instructions?    I know I can figure 
it out... but I'd still like to see what the write-up looks like.

Please forward if you have it.

thanks much!
-Bill


----- Original Message ----- 
From: "David Mackintosh" <mackintosh at gorge.net>
To: <s-car-list at audifans.com>
Sent: Friday, September 16, 2005 10:01 AM
Subject: [s-cars] Right/left threaded Heim joints/links for HSRSB


>I have a used HSRSB on the way in the mail, and remember reading that at
> least one person had replaced the included right/right threaded end links
> with ones that are right/left threaded, so the length could be adjusted
> without disconnecting.  Does anyone have any more info on this, or specs 
> so
> I can try to source the links before I get the bar?  Is it a worthwhile 
> mod?
> Seems like it might help with potential spring-rubbing or other clearance
> issues (I'm using H&R Sports, Bilstein Sports with ECS 10mm spacers on an
> Avant).  Also, how about adding split collars outside of the two pivot
> bushings to restrain the bar laterally?  Additional bracing for control 
> arm
> mounting points?
>
>
>
> Any installation tips?  I'm thinking the best way would be wheels off, but
> rear control arms on jackstands so that the suspension is close to its
> static position.
>
>
>
> Thanks,
>
>
>
> David Mackintosh
>
> mackintosh at gorge.net
>
> 541-400-6300 (cell)
>
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>