[s-cars] more boost with rs2 turbo

[Gabriel Caldwell]

Are you viewing this on the stock in dash boost gauge?  If you upgrade to a 3bar pressure transducer, the value displayed needs to be multiplied by 1.2.

________________________________

From: s-car-list-bounces at audifans.com on behalf of krists at livas.lv
Sent: Tue 18/10/2005 7:05 AM
To: S-CAR-List at audifans.com
Subject: [s-cars] more boost with rs2 turbo



Hello!
The problem is that I'm seeing aprox 1.5 turbo boost pressure (2.5
absolute) all the way to 5500rpm and I can't get it to 1.8BAR. How could I
resolve the problem and what's the limiting factor of boosting max to
1.5BAR? - can one get 1.8BAR with the standart WG spring. Do I need the
stiffer WG spring (one from 034efi that says 1.9Bar max boost) or should I
fit a MBC between the WGFV and WG and keep the stock WG spring?
P.S. I have a 3BAR MAP so no worries about how the ECU could stick with
these boost levels
Silver Euro S4 91'






Megasquirt ECU (3 BAR MAP, custom COP ignition setup, mega squirt'n sparks
-extra firmware)
rs2 turbo
rs2 ex.mani
48lb/h injectors running at 4BAR
Bosch racing fuel pump
710N BPV
custom exhaust system
MB CLK /Typ 208/ 315mm front brakes
Audi A6 2000 avantgarde 17"x8.5
Michelin pilot sport 255x40
Audi TT shifter



--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .


_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list