[s-cars] Front Sway Bar Diameter 28 or 26mm?

[djdawson2 at aol.com]

As far as I know, the only car that actually got a 28mm front bar was the S6+.  It is actually a fairly reasonably priced upgrade, at about $200.  I run that bar in my car, and like it.
 
Dave 
 
-----Original Message-----
From: James Murray (QA/EMC) <james.murray at ericsson.com>
To: Sean Douglas <quattro20v at telus.net>; s-car-list at audifans.com
Sent: Tue, 11 Apr 2006 13:23:03 -0400
Subject: Re: [s-cars] Front Sway Bar Diameter 28 or 26mm?


Right. I think only the 92 had 28mm... Unless some 93's had a carrier
over of parts... They probably reduced to a 26mm bar when they removed
the rear sway bar.

/Jamu. 

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Sean Douglas
Sent: Tuesday, April 11, 2006 12:45 PM
To: s-car-list at audifans.com
Subject: [s-cars] Front Sway Bar Diameter 28 or 26mm?

Trying to figure out the correct size of inner bushing for the front
sway bar. It looks like the diameter was 28mm on the earlier cars and
changed to 26mm on the later. I have a 1997, so its 26mm, right?

Thanks,

Sean Douglas 

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list