[s-cars] Keeping DRLs with a McCullough HID kit via the fogs? Is it possible?

[Dave Forgie]

Contrary to many people, I actually like DRLs and wouldn't want to lose  
them when converting the low beams to HID via a McCullough kit.  I know  
there are procedures to disable the DRLs so the circuit doesn't kill the HIDs
 prematurely.  However, has anyone looked at keeping a form of DRL, i.e.
 running the fogs (at 70% power) while disabling the DRL to the low beam
 circuit.  I am sure it could be done, probably just by re-routing the DRL  
power to the fogs via a relay (or relays).  I would still want to be able to
 switch the fogs on full via the normal circuit as well as the HID lows via  
the headlight switch.

Any Canadian-types (Fred?) done this yet?  

I like the McCullough HID conversion but I will not give up my DRLs.

Dave F.  


This e-mail and its attachments are intended solely for the person or entity
to which it is addressed and may contain confidential and/or privileged  
information.  Any review, dissemination, copying, printing or other use of  
this e-mail by persons or entities other than the addressee is prohibited   
If you have received this e-mail in error, please contact the sender  
immediately and delete the material from any computer.