[s-cars] Bodywork Needed

[Steve Powers]

On 12/7/06, Quattrohead <quattrohead at quattrohead.com> wrote:
> They might be able to pull it out by driving a few screws into the area
> and pulling it out, or taking the door off, gutting it and pushing from
> behind.
> It would then be less to fill, smooth and repaint.

I would run far, far away from anyone using screws to pull out a
panel. They create more work than they fix.

Real body shops use pin welders and slide hammers to pull out dents.
Both tools are cheap enough that many well-tooled enthusiasts own
them.

Steve Powers