[s-cars] replacement 15" steel wheels needed

[LL - NY]

Passat wheels will fit one for one on the Audi, but the offset will be 38 mm
instead of 35 mm.

On 12/14/06, Rich Assarabowski < konecc at snet.net> wrote:
>
> VW Passats use a 5x112 bolt pattern, you'd have to make sure the hub
> diameter is correct if you want to keep the wheels hubcentic.
>
> -- Rich A.
>
> PS  I do know that Subarus (late 90's through early 00's) also used 15"
> 5x112 steel wheels, I think the hub diameters are very close (I think Subaru
> being ever  so slightly bigger than VW, not sure how it compares to the
> Audis
>
>
> ----- Original Message ----
> From: chris chambers <fastscirocco_2000 at yahoo.com>
> To: Scar < s-car-list at audifans.com>
> Sent: Thursday, December 14, 2006 4:21:28 PM
> Subject: [s-cars] replacement 15" steel wheels needed
>
>
> Gentz,
>
> all 4 of my wheels were bent during the accident.
> In my quest to keep the car from being totaled I've
> been trying to source parts. Unfortunately I just
> discovered theat neither Discount Tire or the Tire Rack
> carry 15" steel rims for our cars.
>
> Anyone have any suggestions where I can find economically
> priced 15" wheels for my car?
>
> Thanks
> Chris
>
>
> Make April 15th just another day http://www.fairtax.org
>
>
>
>
> ____________________________________________________________________________________
>
> Need a quick answer? Get one in minutes from people who know.
> Ask your question on www.Answers.yahoo.com
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>