[s-cars] front bumper cover help

[Jerry Scott]

Dennis
Here's Fred Munro's wirte-up:

1. Remove the belly pan.
2. Remove the bumper grill strips - center one first, end ones after.  
Remove the temp sensor behind the license plate holder and unclip the wire.
3. Remove the front bumper - 5 Phillips head screws securing each wheel 
well flap to the wheel well liner and two hex-head bumper bolts.  Unclip 
the bumper ends by pushing down and pulling out on the top and then 
unclipping the botton.  If you pull straight out you'll be there for a 
long time (there's 30 minutes gone).  Pull the ends down to clear the 
wheel well and pull the bumper straight off from the front.

Jerry


DGraber460 at aol.com wrote:

>I need to get my cover off to replace my inter-cooler on my 9 S6.
>How does one get it to slide forward?
>I have removed 2 bolts visible from the front through the grill, but can  
>find no other securing bolts/screws, but it won't budge.
>What have I missed? I have looked everywhere possible for  fasteners and 
>found nothing obvious.
>TIA
> 
>Dennis
>Denver
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>
>
>
>  
>