[s-cars] TT HID retrofit into URS

Dave Forgie forgied at ae.ca
Fri Dec 29 20:14:34 EST 2006


Probably.  Adam's plates bolt to the OEM positions and then provide
holes for the offset bolts.  Either way its not that complicated. 
However, I wonder how many trial and success Z-bolts you created on the
way to the final solution. (just kidding you).

Dave F. 

>>> Igor Kessel <KBATPO at comcast.net> 12/29/06 04:45PM >>>
Dave Forgie wrote:
> The brackets for this conversion have already been designed and
> utilized. 
>  Adam C. from Edmonton, Alberta was the first.  Corey K. (Miniman on
> AW),  also from Edmonton,  used brackets from Adam.  (I was promised
a
>  set from Corey but never received them (Corey!!?).
> 
> Adam's write up at AW is here:
> 
> http://forums.audiworld.com/s4s6/msgs/79736.phtml 
> 
> As you will notice, the photos are missing.  I have BC'd Adam and
> Corey
>  here.  Maybe they can be persuaded to add the photos back to the AW
>  post and/or provide details about the bracket and then repost to AW
> and here.
> 
> HTH
> 
> Dave F.
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com 
> http://www.audifans.com/mailman/listinfo/s-car-list 
> 

Dave,
all you need is four pieces of 4mm threaded rod a few centimeters long,

each bent like a letter "Z". My cost was exactly $0 since I already had

several long 4mm threaded bolts. I sawed off the heads and bent them to

size.

-- 
Igor Kessel
two turbo quattros


More information about the S-CAR-List mailing list