[s-cars] Just fitted the Hazard Warning Triangle

[Harold McComas]

Hello Tony,

I would be interested in pics of the conversion if you would not mind.

I also did a slight mod on my car. I was looking through ETKA and noticed 
some trunk organizers/dividers that the North American cars did not have. My 
parents went to Germany so I asked my Dad to pick up part #  4A5 863 476. 
Will try to get some  installed pics by this weekend, still no digicam for 
me.
Obviously this part will not work on your car if you have the CD changer. 
Pics of just the part in my Audiworld pic poster: 
http://pictureposter.audiworld.com/users/65568.phtml      The tabs on the 
ends of the divider fit right into cut slots in the carpet. Plug and play.

Harold M
Manchester, NH
96 S6


> From: "Tony Curran" <tony.curran at sympatico.ca>
> Subject: [s-cars] Just fitted the Hazard Warning Triangle
> To: "S-Car-List at Audifans.Com" <s-car-list at audifans.com>
> Message-ID: <KFEOJHNELNBFOEFPGIBHCEHECHAA.tony.curran at sympatico.ca>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi folks,
>
> This winters project was to fit hazard warning triange on the inside of 
> the
> trunk lid. The lining of the trunk lid has the depression there already 
> for
> the parts to be fitted. I sliced the liner at the top where the triangle
> will slide thru. I also placed some sticky backed carpet on the trunk lid
> behind the liner so the triangle wouldn't scratch the paint when slid in.
>
> The parts
>
> Triangle: I have 4b5 860 251 C, obtained used from
> http://www.4ringspares.co.uk/ (I was in England last summer) but ETKA 
> shows
> the 99 A6Q with the B version triangle (page 860-00)
> Bracket: 4b5 860 285 D
> Speed nets - I used GM parts (white about half inch square) tho dealer 
> will
> have them.
> Two 8 x 1.5 inch self tap screws.
>
> The liner has an imprint of the bracket on it. The part listed fits 
> exactly
> in this inprint. Behind the liner are two square holes in the trunk lid 
> for
> the speed nuts.
>
> Nice tidy fit. Can send pics if you're interested.
>
> Next job a little bit more tricky...big brake upgrade!
>
> Tony
> 96 S6