[s-cars] Front brake research continues...

[Eric Phillips]

Without looking at the website - I assume you mean that with RS2
brackets and 993TT calipers, ECS has a hat/rotor ring solution that'll
just bolt right up?

$300/rotor seems a bit steep - maybe BIRA can do it cheaper?  Or maybe
it's not worth a few saved dollars...

Eric

On 2/8/06, elijahallen92 at aol.com <elijahallen92 at aol.com> wrote:
>
> You can get the get the 993 rotors and hats from ECS for $599 but you will
> need to get their other brackets or add spacers if you are using A8 rotors
> now.
> http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi?make=Audi&engine=20v%20T&model=C4%20S4&submodel=Quattro&category=Braking
>
> Elijah
> -----Original Message-----
> From: Djdawson2 at aol.com
> To: gcmschemist at gmail.com
> Cc: powellb at gmail.com; s-car-list at audifans.com
> Sent: Wed, 8 Feb 2006 20:41:33 EST
> Subject: Re: [s-cars] Front brake research continues...
>
>
>
In a message dated 2/8/2006 6:15:18 PM Mountain Standard Time,
>
gcmschemist at gmail.com writes:

I'll just see what the 993 rotor rings and
> hats go for, just for
grins. I'll report back, too. After all, the
> information should go
both ways.




If the 993 rings and the hats are a
> direct swap in, in place of the A8
rotors, I would like to hear what they
> cost. I've never checked that option
out.
>
Dave
_______________________________________________
S-CAR-List
> mailing
> list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
>