[s-cars] unbolting DP from turbo

Sean Douglas quattro20v at telus.net
Fri Feb 10 20:56:09 EST 2006


This is the special low clearance nut and requires a 15 mm half moon
wrench bent even farther. Use a MAPP or acetylene torch and heat up to
bend as per the picture:

http://pictureposter.audiworld.com/52091/wrench.jpg

Sean

> -----Original Message-----
> From: s-car-list-bounces at audifans.com 
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Rich Palazzoli
> Sent: Friday, February 10, 2006 4:09 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] unbolting DP from turbo
> 
> 
> Okay,having a little(alot) of trouble getting onto the lower 
> inside nut of the DP to turbo flange nut with anything other 
> than a socket,But once socket is on I cant get an extension 
> into socket...recess into DP isn't deep enough for a 
> swivel....Do I need a crows foot or what else is used ?????
> 
> --
> Bing
> 93' urS4
> 01' A4 30vQM
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com 
> http://www.audifans.com/mailman/listinfo/s-> car-list
> 



More information about the S-CAR-List mailing list