[s-cars] Alternative to our 4A0 905 351A POS units

[Joseph Pizzimenti]

He's Canadian, ya know.


-----Original Message-----
From: Jerry Scott <jerryscott at wispertel.net>
Date: Thu, 16 Feb 2006 16:56:49 
To:s-car-list <s-car-list at audifans.com>
Subject: Re: [s-cars] Alternative to our 4A0 905 351A POS units

Dave
In your note you refer in the subject to our  4A0 905 351A. In the text 
you refer to the S4 number as: 4A0 905 315A.  Then you mention as the 
Hitachi number for the V6 as, 4A0 905 351.  You later refer to the 
Hitachi number as 4A 905 315.  Am I just totally confused or am I 
dealing with a dyslexia patient? What are the correct numbers?
Jerry

forgied at direct.ca wrote:

>No. I don't mean 1.8t coil packs, necessarily.
>
>Earlier this week, Pop (from Thailand)on AudidoodiWorld was wondering 
>whether the 4A0 905 351 Power Output Stage (POS) from a 92-97 wasted spark
>(fires two cylinders at once) V6 ignition system would work on our cars,
>as a substitute for our 4A0 905 315A POS units. I was skeptical having
>never seen one. Bar1 from Europe said it would work. Pop said it would
>work. SA UrS4 from South Africa said it would work. I wanted more info
>(e.g. a picture).
>
>Today, at lunch, I went over to VM Autohaus to see one of these brown
>Hitachi-made 4A0 905 315 POS units that Kris has in stock for his V6
>customers. Sure enough the 315 Hitachi is very close to the 315A Bosch.
>The Hitachi is slightly longer but the pins seem to be the same (I
>compared it two my old POSs that are still mounted on the firewall (but
>not being used)).
>
>Looking at the front side, the pin lables are as follows:
>
>E1_E2_E3 at the three pin end and
>
>I1_I2_G_I3 at the four pin end.
>
>I don't have my pin out info handy so I can't confirm 100% that the pin
>outs are the same. I will do that tonight at home and report back.
>
>For giggles, I asked Kris to check the pricing on the 315A (our OE number)
>and the 315 (the V6 POS). My price (in $CDN) would be $320 for the 315 A
>(S4/S6) and $175 for the 315 (V6) POS.
>
>For comparisons, the $320 315A price for the single POS is about what I
>spent for my entire 1.8t coil pack conversion. The $175 single 315 price
>is about what I paid for five 1.8 t 115L coil packs (that have built-in
>POSs).
>
>Oops.  Sorry, some 1.8t coil pack stuff did creep in after all.
>
>Dave F.
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>
>
>
>  
>

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

Regards,

Joseph Pizzimenti

Better Building Services

551 Westchester Avenue

Rye Brook, NY 10573

 

Phone: (914) 939-3878

Fax: (914) 939-1637

Email: joe at betterbuildingservices.com

 

This electronic transmission message is intended only for the use of the individual or entity to which it is addressed. The information in this transmission may be proprietary, confidential, privileged and exempt from disclosure under applicable law. If the reader of this Notice is not the intended recipient (or the employee or agent responsible for delivering the message to the intended recipient), you are hereby notified that any use, dissemination, distribution or copying of this communication is prohibited.

If you have received this communication in error, please immediately notify us by e-mail and destroy the material transmitted to you in error. Thank you for your cooperation.