[s-cars] RS2 Injectors - worth the $s?

[Bruce Mendel]

You can get the Lucas 37 lb/hr injectors for $35-$40 each, then the turbo,
then MRC software matched to that setup. Runs just as hard as the RS2 full
setup, but way cheaper. And instead of buying the RS2 MAF, you can buy the
Porsche 968 MAF, or just remove the screen from your current MAF.

Same HP, less money.

B
----- Original Message ----- 
From: "Rob Pecsar" <rpecsar at pacbell.net>
Cc: <urq at audifans.com>; <s-car-list at audifans.com>;
<Audi5TurboTech at yahoogroups.com>
Sent: Saturday, February 18, 2006 10:12 AM
Subject: [s-cars] RS2 Injectors - worth the $s?


> Anyone out there with some RS2 Fuel Injector "been there, done that"?
>
> So far, I have the MTM stage 1 (software and upgrade pressure
> transducer), and the RS2 exhaust manifold.
>
> Is there much performance at the next stage if I install the $645(!) RS2
> Fuel Injectors with the RS2 Turbo? Hoppen Motorsports(MTM rep) says you
> can safely upgrade to the RS2 turbo with or without the injectors, with
> different software in each case. What they can't seem to tell me is has
> much H/P or torque am I leaving on the table by not upgrading the
Injectors.
>
> MTM/Hoppen claims:
>     Stage 1 software put you at 280 HP - 332 lb/ft @ 2800
>     Stage 2 (more software & RS2 exhaust manifold = 290 HP - 340 lb/ft @
> 2900
>     Stage 3 (software & RS2 manifold/turbo/injectors) = 335 HP
>
> Also, anyone know of a much better price than $129/ea RS2 injector?
>
> Thanks for the help,
>
> Rob Pecsar
> 95 urS6
>
>
> >
> >
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>