[s-cars] To ceramic coat or not

[Mark Strangways]

How thick is the coating ?
Wondering just how much space it would occupy inside a otherwise nice and 
smooth SS downpipe.

Mark S
----- Original Message ----- 
From: "Kenneth Keith" <auditude at gmail.com>
To: <s-car-list at audifans.com>
Sent: Thursday, January 05, 2006 11:43 PM
Subject: Re: [s-cars] To ceramic coat or not


Hi Elijah,

Which coater and coating were you planning on using?  I know some
places don't offer/recommend coating the inside.  To me it makes sense
to keep the heat in the gas versus the metal, assuming no other reason
not to do it.

Ken

elijahallen92 at aol.com
>
> Depends on how deep your pockets are, there is no downside to ceramic 
> coating but it can get expensive. On the other hand so can a cracked 
> manifold or DP and if it is ceramic coated on the inside it more than 
> likely won't crack. I am ceramic coating my header inside and out for both 
> the protection and performance aspect. When I get the money saved I will 
> also do the DP. So without directly answering your question, there is my 
> opinion.
>
> Elijah
>
> -----Original Message-----
> From: manuelsanchez at starpower.net
>
> S-heads,
>
> With the recent discussion of ceramic coating, and my recent
> arrival of a new Stromung downpipe, I ask; is it worth putting
> a ceramic coating on the downpipe? Is it too far downstream?
> Somethin' better than nuttin'?  My EM came too late for me to
> coat it a while back.
>
> TIA.
>
> manny
>
> Uncoated Flatulence Evacuation System
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list