[s-cars] Link to Dennis Graber's 1.8t Coil Pack Conversion Photos and write-up

[Peter Schulz]

Jerry:

Not to start a solder vs crimp debate, but Audi only considers a crimp to 
be a proper way of connecting two wires.

Of course you need to correct crimping tool and connectors, yadda yadda....


-Peter
At 10:20 PM 1/18/2006, Jerry Scott wrote:
>All those crimp connectors could come to haunt you after a few heating and 
>cooling cycles.  I would recommend soldering and shrink tubing, just to be 
>on the safe side.
>Jerry
>
>Dave Forgie wrote:
>
>>Dennis did a great job.  You should have a look.
>>
>>http://forums.audiworld.com/s4s6/msgs/102991.phtml
>>
>>Dave F.
>
>-Peter Schulz
>Chelmsford Ma, USA
>
>1991 200 20v Q Avant Titan Grey
>1991 200 20v Q Avant Indigo Mica
>1991 90 20v Q Red
>1990 CQ silver (awaiting S2 engine transplant)
>1990 CQ red ( to part or not)