[s-cars] front axle removal..

[Djdawson2 at aol.com]

In a message dated 1/20/2006 11:04:39 AM Mountain Standard Time,  
HaroldMcComas at comcast.net writes:

None, as  it is not a Torx. Usually called a triplesquare, 12 point ? , 8mm 
size I  think. Make sure to clean all the crud out and I usually give the  
triplesquare bit a "slight" tap to make sure that it is seated  properly.



An 8mm allen socket will work as well... but as pointed out, it is very  
important to clean the inside, and firmly tap the socket into the bolt so that  
you get max penetration.  Otherwise, you'll be faced with a PITA bolt  
extraction.
Dave