[s-cars] Adding Oil pressure gauge to 95 S6

[Igor Kessel]

Peter Golledge wrote:
> Listers,
> 
> My wife's "new" daily driver is an 95.5 S6 Avant, the only thing that bugs
> her (and me.) is that it has no oil pressure gauge.   The 89 200TQA had this
> as does the LT-1Q.
> 
> Any BTDT on adding a new gauge?  I mounted an Autometer unit into the LT-1Q
> but I did not mind "modifying" the console in a mostly track car.  I am
> considering using the "spare" switch area for the Gauge end of things.

Peter,
in mine I installed an UrS4 gauge in place of the clock, thus retaining 
100% factory look of the instrument cluster.

> Where is the best point to tap in a pressure sensor to the oil system?

In top part of the block there is an unused 10x1 mm treaded port. I 
installed an Audi 200 sender into it and ran two wires to the 
unpopulated positions of the black 4-pin plug in the instrument cluster. 
I don't remember the details, but you should be able to do this if you 
analyse the wiring diagramme in your Bentley.

-- 
Igor Kessel
two turbo quattros