[s-cars] Big Reds/Blacks shims/pucks

[Igor Kessel]

Douglas Fifield wrote:
> Igor,
> 
> Will it take the heat?
> 
> D.
> 
> On 7/31/06, Igor Kessel <KBATPO at comcast.net> wrote:
>> Robert Rossato wrote:
>> > Assuming the tape you have is thin enough, and you clean off the old
>> > residue, I don't see why not.
>> >
>> > Bob
>> >
>> >> -----Original Message-----
>> >> From: s-car-list-bounces at audifans.com
>> >> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Igor Kessel
>> >> Sent: Monday, July 31, 2006 8:03 AM
>> >> To: Audi S-list
>> >> Subject: [s-cars] Big Reds/Blacks shims/pucks
>> >>
>> >>
>> >> Folks,
>> >> The rosette shims have lost their sticky layers and have
>> >> separated from
>> >> the old pads. Can they be reused perhaps with some double sticky tape
>> >> which I have lots of?
>> >>
>> >> --
>> >> Igor Kessel
>> >> two turbo quattros
>>
>> Bob,
>> I can sand the residue off easily, there is hardly any residue left. As
>> for the tape it is the standard 1/2" wide about 0.5mm thick 3M tape,
>> with the green/white cross-hatched peel-off backing.
>>
>> -- 
>> Igor Kessel
>> two turbo quattros

That's a good point, Douglas. The regular 3M double side tape will most 
certainly not take this kind of heat. I wonder what can be used instead. 
Perhaps the blue brake anti squeal paste will do?

-- 
Igor Kessel
two turbo quattros