[s-cars] Crossover pipe

[jpb3]

Gents,

I replaced my 95.5 plastic x-over with a 92 steel pipe ( way too heavy to be
aluminum) and had to utilize the additional brackets that came with the 92.
The tabs do not line up, not even close.

john

On 6/11/06, Robert Rossato <r0ssat0_987 at att.net> wrote:
>
> GSM motorsports something or other comes to mind.
>
> > -----Original Message-----
> > From: Michael Bess [mailto:mlbess at optonline.net]
> > Sent: Sunday, June 11, 2006 5:12 PM
> > To: 'Robert Rossato'; 'Fred Munro'; 'Sean Douglas';
> > s-car-list at audifans.com
> > Subject: RE: [s-cars] Crossover pipe
> >
> >
> > Now supposedly the guys who made them for NEA were the ones
> > offering them on
> > eBay.  Anyone remember their name?
> >
> > Mike
> >
> >
> > -----Original Message-----
> > From: Robert Rossato [mailto:r0ssat0_987 at att.net]
> > Sent: Sunday, June 11, 2006 2:09 PM
> > To: 'Fred Munro'; 'Sean Douglas'; mlbess at optonline.net;
> > s-car-list at audifans.com
> > Subject: RE: [s-cars] Crossover pipe
> >
> > I'm wondering now if Sean was possibly referring to the aluminum ones
> > that NEA used to sell?  Those probably fit without additional
> > hardware,
> > though no first hand experience.
> >
> > Bob
> >
> > > -----Original Message-----
> > > From: Fred Munro [mailto:munrof at sympatico.ca]
> > > Sent: Sunday, June 11, 2006 3:05 PM
> > > To: Robert Rossato; 'Sean Douglas'; mlbess at optonline.net;
> > > s-car-list at audifans.com
> > > Subject: RE: [s-cars] Crossover pipe
> > >
> > >
> > > Bob;
> > >
> > > As you mention, I had to use the additional brackets and
> > > grommets on my '97
> > > S6. The brackets as welded to the pipe did not mate up to
> > the mounting
> > > points on the S6.
> > >
> > > Fred
> > >
> > > -----Original Message-----
> > > From: Robert Rossato [mailto:r0ssat0_987 at att.net]
> > > Sent: June 11, 2006 1:22 PM
> > > To: 'Sean Douglas'; 'Fred Munro'; mlbess at optonline.net;
> > > s-car-list at audifans.com
> > > Subject: RE: [s-cars] Crossover pipe
> > >
> > >
> > > Seam - There are mounting tabs welded on to the aluminum
> > > pipe, but they
> > > are supposed to interface with some additional brackets and grommets
> > > that were not used on the S6.  Though it seems you can make it work
> > > based on your comment.
> > >
> > > Bob
> > >
> > > > -----Original Message-----
> > > > From: s-car-list-bounces at audifans.com
> > > > [mailto:s-car-list-bounces at audifans.com] On Behalf Of Sean Douglas
> > > > Sent: Sunday, June 11, 2006 1:06 PM
> > > > To: 'Fred Munro'; mlbess at optonline.net; s-car-list at audifans.com
> > > > Subject: Re: [s-cars] Crossover pipe
> > > >
> > > >
> > > > Fred: The metal pipe I installed to replace my plastic one had the
> > > > mounting tabs welded to it and it matched up perfectly.
> > > >
> > > > Mike: There was a few for sale on Audifans, left over from FMIC
> > > > upgrades.
> > > >
> > > > Sean
> > > > 1997 S6
> >
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>