[s-cars] Was: Whats leaking? Now: What parts number?

[Ivan Demkovitch]

Folks,
 
Can somebody lookup ETKA for 
1. Seal
2. O-Ring
3. Bearing
 
Thanks,
Ivan

----- Original Message ----
From: Fred Munro <munrof at sympatico.ca>
To: Ivan Demkovitch <idemkovitch at yahoo.com>; CLAG500 at aol.com; s-car-list at audifans.com
Sent: Sunday, June 25, 2006 12:43:38 PM
Subject: RE: [s-cars] Whats leaking? Between gearbox and torsen..


Ivan;

If you have to change the rear seal, you have to remove the tailshaft
assembly and press the stub shaft out of the bearing to get at the seal
(great design, what?). You'll need a new seal, an new o-ring to seal the
tailshaft housing to the torsen case, and a new bearing on hand in case you
pooch the old one during the pressing operation. You'll have to remove the
exhaust, the cats, and disconnect the driveshaft at the transmission. You
don't have to drain the tranny oil although a bit may come out when you pull
the tailshaft assembly.

Fred