[s-cars] NAC - Garage Drainage Issue

David Kase davekase at pdqlocks.com
Mon Jun 26 15:17:03 EDT 2006


You can drill some holes through the driveway to the stone below.  If 
you make them where the grates will be, no big deal...

A friend of mine actual did this in his garage to let the snow melt off 
and drain.  Works great if you get the holes at the low points.

Dave Kase

Joe Pizzimenti wrote:

>Just use the cold patch and compact by driving over it, but use plywood
>blocks to form the bump.
>
>On 6/26/06, Mark Pollan <mark.pollan at verizonbusiness.com> wrote:
>  
>
>>Hi All:
>>
>>
>>
>>My garage takes on water any time there is rain and/or snow.  The driveway
>>(asphalt) was not graded properly and there is a swell about 3 feet out
>>from
>>the bays resulting in not insignificant drainage into the garage.  In
>>front
>>of one of the bays there is a small speed bump that the asphalt company
>>formed to keep the water out but unfortunately they did not do it in front
>>of the other bay.  My long term solution is to install some perimeter
>>drainage with removable grates capable of supporting the weight of a car
>>tire but until then.
>>
>>
>>
>>I thought about cold pack asphalt but have not come up with a way to
>>adequately compact it in the form needed.  I also thought about
>>semi-circular solid rubber that I can "glue down to form the "speed bump"
>>to
>>act as a water diversion/channel but cannot source it.  McMaster Carr is a
>>no go.  Can anybody provide me with an alternate/interim solution and/or
>>know where I can source said rubber speed bump.  I have *way* too much
>>right
>>now to attack the long term solution.
>>
>>
>>
>>Regards,
>>
>>
>>
>>Mark
>>
>>
>>
>>_______________________________________________
>>S-CAR-List mailing list
>>S-CAR-List at audifans.com
>>http://www.audifans.com/mailman/listinfo/s-car-list
>>
>>    
>>
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>  
>

-- 
David B. Kase
Engineering Manager
PDQ Industries, Inc.
2754 Creek Hill Road
PO Box 507
Leola, PA 17540

717-656-4281 (p)
717-656-8749 (f)



More information about the S-CAR-List mailing list