[s-cars] Cheap/effective FMIC option w/ Sex and free beer!

[Pat Martin]

It's pretty yet still stealthy. Me likey.

 

Unfortunately I have a bunch of experience with trying to squeeze an
intercooler in a very small area.  S-cars have acreage compared to a 4k.
Plus the plumbing routes are much easier.  My 4ktq has a 944 turbo
intercooler which is ~3-4" thick.  It is located in front of the radiator so
I have plenty of depth to work with.  When I looked up the formula for that
when I installed it and it said it needed about 3" of ducting to supply
enough pressure to feed it.  I have 4 or so.  It does not taper down to a
smaller intake however mainly due to my laziness not because I thought it
would be any better without the taper.  It has been a while but I think it
said I only needed about 20 square inches of opening to feed it.  The
intercooler face area is something in the neighborhood of 114 square inches.


 

Pat Martin

95 S6 Avant, IA Stage III, 18x8 RS knockoffs. 255/30/18 PZero Nero's, Back
in the stable again.

 

86 4kcsq turbo, 3" "cat" back, Coil overs/konis holding it up, MC and loving
it.  Custom ECU with data logging tuning it, Drilled and stopping it.

Borbet's with Kuhmo V710's  turning it,  K&N and uh....

 

98 A6q Avant.

 

97 Ford F350 Crew cab, 4x4, GGGGGAAAAAASSSSS.  Never met a station it didn't
like.  

 

 

  _____  

From: CaptMagu at aol.com [mailto:CaptMagu at aol.com] 
Sent: Sunday, March 05, 2006 2:46 PM
To: mardkins at msn.com; gcmschemist at gmail.com
Cc: s-car-list at audifans.com
Subject: Re: [s-cars] Cheap/effective FMIC option w/ Sex and free beer!

 

Pat

This is a very important subject to me. I like to keep lots of positive
pressure on my FMIC. Here's a link to pics.

http://forums.audiworld.com/s4s6/msgs/109169.phtml

Hap, wit dakine positive FMIC not from Evahboost, Maguire