[s-cars] Hardwired V1

[chris chambers]

Ron,

mine is currently mounted above the rear view mirror, with the power
cable routed above the headliner, down the a pillar behind the trim to
the bottom of the dash.

Behind the "kick panel" under the dash there is a point where you can
tap into for power. I selected the one that is on/off with the
ignition.

I also have my Remote display integrated into the instrument cluster,
here is a pic of the display.
http://img.photobucket.com/albums/v48/chrisanjenn/Audi%20S4/Remotedisplay2.jpg

And here is a link to a how to guide Dean Ferrera wrote about
intregrating the remote display into the IC: 

And I also installed a mute foot switch on the floot, here is a pic:
http://img.photobucket.com/albums/v48/chrisanjenn/Audi%20S4/Mutepedal.jpg


My next project is to completely hide the V1, I had one confiscated
while driving through Canada and don't want that to happen again. My
plan is to have an old radar detector in the glove box, that way if
they
detect my V1's signal then I can hand over the old POS one and not the
V1 because it will be safely hidden.


HTH
Chris


--- Ronald Whiton <dooksniffer at gmail.com> wrote:

> S-folk,
> 
> I know some of you have done this.
> What power source did you tie into?
> Where did you mount it?
> 
> I'm not looking to integrate into the dash, I just can't stand
> looking at
> the cord any longer.
> Any and all thoughts appreciated.
> 
> TIA
> 
> Ron Whiton
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 


Make April 15th just another day http://www.fairtax.org


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com