[s-cars] Link to 1.8t Coil Pack Conversion pdf at S-cars.org

[Dave Forgie]

Jim:  The pdf can be found at S-cars.org by drilling down a couple of levels
  on:

http://www.s-cars.org/postnuke/

Note:  The pdf has NOT been updated to include to recent updates:

1.  the female pins for the coil packs can be the 141 instead of the 133A
 pins. The 141 pins fit in the 4B0 973 724 (or 1J0 973 724) coil pack
 connectors easier than the 133A pins.

2.  The Jetta III taillight connectors can be dropped in favour of two 1J0
 973 824 male pin connector housings and two additional 1J0 973 724
 female pin housings (that you swap the pins into from the OE ECU to POS
 connectors).

Hope this helps.

Dave F.  


This e-mail and its attachments are intended solely for the person or entity
to which it is addressed and may contain confidential and/or privileged  
information.  Any review, dissemination, copying, printing or other use of  
this e-mail by persons or entities other than the addressee is prohibited   
If you have received this e-mail in error, please contact the sender  
immediately and delete the material from any computer.