[s-cars] Fwd: brake hoses/lines for Big Brakes

[Kenneth Keith]

Thanks Sean! I thought there was more to it than that.  That would
explain why the budget big brake kit writeups and parts lists I've
seen don't mention much about the lines.

So then I can just get either new stock lines or DOT braided stainless
aftermarket ones for my application.  That's what I'll do then.  I'd
like to get these on the car soon.

By the way ECS responded to my inquiry saying that they no longer sell
the lines separately from their big brake kits.

Cheers,

Ken

On 3/16/06, Sean Douglas <quattro20v at telus.net> wrote:
> If you want a OEM rubber line, your stock ones will work. They are 405
> mm long IIRC.
>
> Sean
>
> > -----Original Message-----
> > [mailto:s-car-list-bounces at audifans.com] On Behalf Of Kenneth Keith
> >
> > I'm trying my question here because I haven't heard a peep on
> > the 200q20v list.  I believe urScars are the same as my car.
> > So what brake hoses/lines do I need a Big Black upgrade?
> >
> > Thanks,
> >
> > Ken
> >
> > ---------- Forwarded message ----------
> > From: Kenneth Keith <auditude at gmail.com>
> > To: 200q20V mailing list <200q20v at audifans.com>
> >
> > I picked up a pair of Big Blacks (928gts calipers) and am
> > getting ready to put them on my 200q20v with RS2 brackets and
> > A8l rotors.
> >
> > I know there have been lots of discussions about brake lines
> > recently and in the past, somewhere, but I didn't catch the
> > details about what lines (hoses, the flexible lines) I need
> > to use to mount the Porsche calilpers to my 200q20v.
> >
> > Can someone please point me to a resource or tell me what
> > lines/hoses are needed?
> >
> > Also, do I reuse the Audi bracket-to-wheel bearing housing bolts?
> >
> > I want to get these brakes on so I'll be able to stop after I
> > make it go better. =)
> >
> > Thanks,
> >
> > Ken