[s-cars] New motor mounts

[James Murray (QA/EMC)]

Guys... Has anyone tried these new fangled motor mounts from 034EFI?

http://www.034motorsport.com/product_info.php?products_id=434

And tranny mount:
http://www.034motorsport.com/product_info.php?products_id=433

And this trany mount:

http://www.034motorsport.com/product_info.php?cPath=25_66_69&products_id
=286

Just looking for feedback...

For the snub mount, I highly recommend this snub mount modification
upgrade!:

http://forums.audiworld.com/s4s6/msgs/78276.phtml

Cheers, /Jamu. 

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Sean Douglas
Sent: Thursday, March 16, 2006 6:58 PM
To: 'chris chambers'; 'Scar'
Subject: Re: [s-cars] New motor mounts

Chris:

The part numbers are the same, 443 199 379 D, you will see a white blob
of paint indicating the D-suffix (white=weiss).

Yes, on jackstands.

Sean

> -----Original Message-----
> From: chris chambers [mailto:fastscirocco_2000 at yahoo.com]
> Sent: Thursday, March 16, 2006 3:30 PM
> To: Sean Douglas; Scar
> Subject: Re: [s-cars] New motor mounts
> 
> 
> Sean,
> 
> My new motor mounts arrived Tuesday, I plan on replacing them this 
> weekend (If I can fix my jack).
> 
> There were two different part numbers for each mount, but they look 
> the same to my untrained eye.
> 
> Did yo notice anything different between the two mounts?
> I assume you lifted your car up and put it onjack stands right?
> 
> Thanks
> Chris
> 
> --- Sean Douglas <quattro20v at telus.net> wrote:
> 
> > Installed both engine mounts today, not too hard, took me about 3 
> > hours including wrestling with the belly pan.
> > 
> > Driver side, easy.
> > 
> > The turbo side one is not that hard to get out, a long
> extension with
> > a u-joint on the end and you can reach down between the turbo and 
> > exhaust manifold to get the top bolt. A socket will not reach the 
> > bottom nuts, so a combo wrench is used. It would be easier with a 
> > gear wrench.
> > 
> > Make sure to support the engine with a floor jack under the oil pan.
> > 
> > Hint, after removing the hardware, jack up on the engine to
> lift it as
> > high as will go, this will give you more clearance to maneuver the 
> > mounts out.
> > 
> > Shifting has improved, still not as tight as I want and the trans 
> > mounts were done about 2 months ago.
> > 
> > Looks like a new snub mount is on the horizon.
> > 
> > Sean Douglas
> > 
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
> > 
> 
> 
> Make April 15th just another day http://www.fairtax.org
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com
> 

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list