[s-cars] New motor mounts

[James Murray (QA/EMC)]

 Good to know, however I used the "Pure Motorsport" Snub Mount, and modified it to reduce the play... not sure I would want "Zero" play... but putting a 1 1/2 PVC coupler reduced the play considerably, and it was cheap ;-)

/Jamu.

-----Original Message-----
From: Sean Douglas
To: James Murray (QA/EMC)
Cc: 'Scar'
Sent: 3/16/2006 7:39 PM
Subject: RE: [s-cars] New motor mounts


> For the snub mount, I highly recommend this snub mount modification
> upgrade!:
> 
> http://forums.audiworld.com/s4s6/msgs/78276.phtml
> 

FYI, the 034 snub mount kit is not a direct bolt on for our cars, only
the smaller chassis cars with an inline 5 (4000/90). I just tried
fitting one to my car and the mounting slots do not line up.

The 034 kit has zero play in it, the bushing friction fits inside the
bracket. I'm considering adapting the 034 bracket to the original one so
that there will be zero play.

Sean