[s-cars] upper t-belt cover/guard

[David Kase]

Ah, indeed...sorry...

Peter Schulz wrote:

> Dave:
>
> The 7a cover will fit the 3B, but not the AAN/ADU/ABY...
>
> -peter
>
> At 10:28 AM 3/22/2006, David Kase wrote:
>
>> I am fairly sure a standard 20v NA engine upper cover is the same 
>> thing.  You might have better luck finding one of these.  Check 
>> Audifans Marketplace, there are several 20v cars being parted.
>>
>> Dave Kase
>>
>> Ronald Whiton wrote:
>>
>>> I've called a couple yards and am getting ready to head to stealer,
>>> but thought I might as well troll the list too.  Anyone have one of
>>> these lying around?  I mangled mine while trying to replace CPS with
>>> the front end intact.
>>>
>>> How dangerous is it to operate without the cover in place?  Yes, I dug
>>> out all the little pieces that found their way into the lower sprocket
>>> and then manually cranked the engine a couple times.
>>>
>>> Thanks
>>>
>>> Ron Whiton
>>> _______________________________________________
>>> S-CAR-List mailing list
>>> S-CAR-List at audifans.com
>>> http://www.audifans.com/mailman/listinfo/s-car-list
>>>
>>
>>
>> _______________________________________________
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
>> http://www.audifans.com/mailman/listinfo/s-car-list
>
>
> -Peter Schulz
> Chelmsford Ma, USA
>
> 1991 200 20v Q Avant Titan Grey
> 1991 200 20v Q Avant Indigo Mica
> 1991 90 20v Q Red
> 1990 CQ silver (awaiting S2 engine transplant)
> 1990 CQ red ( to part or not)
>