[s-cars] 1992 Spring Question & more

[Michael Bess]

While we are focusing on springs....I have a chance to pick up a set of used
H&R's for my S6 since I have been unsuccessful in finding any '92 springs
anywhere on the east coast.  That is unless I go to a dealer and pay $$$
(how about 200 and 170 f/R each).

So the H&R's are marked H&R 29921 HA (R) and H&R 29921 VA (F).

What is the collective wisdom on these?  I don't want to slam the car
(definitely not with NY roads) nor do I want to mess around with modifying
camber plates (although I might go with the Igor mods if needed).  I
understand these drop the car about 1.25".  I want to stiffen things up a
bit and get rid of the excessive tire-wheel well gap.

TIA,

Mike Bess
'95 S6 RS2 MCR


-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Sean Douglas
Sent: Friday, May 12, 2006 10:04 PM
To: Young, Steve
Cc: 's-car-list'
Subject: Re: [s-cars] 1992 Spring Question

Hi Steven:

I checked ETKA and the only reference to 3 blue, 1 yellow is the rear
springs 
which is for the 92-spec and euro-spec sport. This confirms my research for 
the rears.

However, I cannot find any reference to 3 blue and 1 yellow for the fronts
in 
ETKA (US or Europe).

Can you take a picture of the fronts?

Thanks,

Sean


Quoting "Young, Steve" <sryoung at trane.com>:

> Sean...
> 
> I had purchased a set of 92 springs off Audifans, so I went out to check.
> All four springs have the 3 blue:1 yellow markings.  I can send you a pic
> off-list if interested.
> 
> I hope to use them on my 95.5 Avant.  Listers speak up if this won't work.
> 
> 
> Regards,
> 
> 				TRANE
> Steven Young
> Local Operations Manager
> Albany Office