[s-cars] New sensor still got codes

[Aaron Taylor]

Hey Ron
On the DIY kit - what do you spose it will end up costing you?
The kit is here:
http://www.034motorsport.com/product_info.php?cPath=26&products_id=450
Wondering if its worth the extra $.?
Aaron

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Ronald Whiton
Sent: Friday, May 26, 2006 12:26 PM
To: s-car-list at audifans.com
Subject: Re: [s-cars] New sensor still got codes

Is there a link to this 034 coil kit somewheres?  I must have been on
a mental vacation when it hit the list.
I currently have the DIY kit roughed into my car that is still not
starting.  I did however receive a new G28 from SJM today and am very
excited to get home for the install.  Longest Friday ever!!

Ron Whiton

On 5/26/06, iain.atkinson at tesco.net <iain.atkinson at tesco.net> wrote:
> brilliant mod fitted in less than 20 minutes, i am not the greatest with
wiring myself so i didn't even consider diy, and yes it is truly plug and
play, does away with the pos units completely. Cured my misfire.
>
> iain
> >
> > From: "Aaron Taylor" <atay at cox.net>
> > Date: 2006/05/26 Fri PM 03:54:13 BST
> > To: <iain.atkinson at tesco.net>,
> >       "'Markus Fagervik'" <markus.fagervik at abo.fi>,
> >       <s-car-list at audifans.com>
> > Subject: RE: [s-cars] New sensor still got codes
> >
> > 034 vs do it your self coil modification
> > Iain -
> > How plug and play in the 034 coil kit.  At 355$ it seems like a pretty
good
> > deal.  Did you compare costs to wiring something up yourself?
> > Is it truly plug and play?
> > Are you running the coil cover?
> > Ive been experiencing some slight hesitation and am considering this
mod.
> > Thanks
> > Aaron
> >
> > -----Original Message-----
> > From: s-car-list-bounces at audifans.com
> > [mailto:s-car-list-bounces at audifans.com] On Behalf Of
> > iain.atkinson at tesco.net
> > Sent: Friday, May 26, 2006 3:13 AM
> > To: Markus Fagervik; s-car-list at audifans.com
> > Subject: Re: [s-cars] New sensor still got codes
> >
> > Markus
> >
> > i would say you are right, i had a high boost misfire which may have
been
> > upsetting the sensors, i have now replaced both sensors down there and
still
> > had the code as i earlier reported. However what seems to have cured the
> > problem is the 034 efi 1.8T coil conversion, it's been fitted now for
48hrs
> > and rigouresly tested (down to 18mpg on the trip computer ahem) not a
miss
> > at all.
> >
> > Iain
> > >
> > > From: Markus Fagervik <markus.fagervik at abo.fi>
> > > Date: 2006/05/26 Fri AM 08:53:42 BST
> > > To: s-car-list at audifans.com
> > > CC: iain.atkinson at tesco.net
> > > Subject: Re: New sensor still got codes
> > >
> > > I haven't been following this thread, but I had the same issue on my
> > > S2 (ABY engine, almost identical to the AAN). I tried changing sensors
> > > and all that stuff, but nothing worked. Car would still randomly cut
> > > out and leave that "Engine speed sensor (G28) - Implausible signal -
> > > Intermittent"-code.
> > >
> > > Well, later on I had to change an ignition coil due to a misfire
> > > condition. After changing the coil the car has not once cut out nor
> > > have I gotten the aforementioned fault code! My best guess is that the
> > > bad coil was shorting out, the ECU went crazy and somehow reported
> > > this misleading fault code.
> > >
> > > Not saying that your fault is the same, but it's a good guess.
> > >
> > >
> > > Regards,
> > > Markus
> > >
> > > Quoting iain.atkinson at tesco.net:
> > >
> > > > Date: Wed, 24 May 2006 8:11:51 +0100
> > > > From: <iain.atkinson at tesco.net>
> > > > Subject: [s-cars] New sensor still got codes
> > > > To: <S-CAR-List at audifans.com>
> > > >
> > > > i have replaced what i thought was a failing engine speed sensor
> > > > (G28) on my S6 but it's still throwing me the code, intermittant
> > > > signal, car is even now starting to cut out on me, not at speed but
> > > > slow stuff like pulling in the drive or coming up to a junction, any
> > > > further ideas on why this should be??
> > > >
> > > > I know this one runs off the flywheel teeth, am pretty sure i don't
> > > > have a damaged flywheel (like missing teeth)as the car starts fine,
> > > > had a recent clutch done but the car has always thrown this code
ever
> > > > since i first got it 5 months ago. Bentley doesn't seem to show any
> > > > sort of gap adjustment on this like abs sensors for instance.
> > > >
> > > > Thanks
> > > >
> > > > Iain
> > >
> >
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
> >
> >
> >
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list