[s-cars] oem for front Strut mounts?

[Peter Schulz]

Eric:

With the current preponderance of cheap, low quality parts in the 
marketplace of doubtful manufacture ( how many folks have seen "made 
in Germany on the same box with a "made in China" sticker? ),  I am 
very careful to first check the manufacturer and country before 
ordering parts.

If a site doesn't show the oem, or I can not contact the seller and 
verify the oem ( Scott Mockry will do this for you) , I shop elsewhere.

I am trying to avoid Meyle, due to their product quality issues, but 
even in my quest for a Heater Core, it seems that AKG is 
manufacturing in  China...


Thanks for tip on the dust boot and the link to the parts bin, but 
the site doesn't show the mount manufacturer....


-Peter





(suffered that already, not to mention posts of late on this list) At 
01:27 PM 11/6/2006, RubEric at aol.com wrote:
>In a message dated 11/6/2006 10:08:18 AM Pacific Standard Time, 
>pcschulz at comcast.net writes:
>.,,,have to pull the struts anyway, because the mechanic that
>the previous owner used did NOT install the dust boots!
>
>You do not need to remove the struts to install the dust boots. 
>Remove the mounts, spray the bellows with silicone and you can feed 
>them in from the top.
>
>Strut mounts at 
><http://oem.thepartsbin.com/parts/thepartsbin/wizard.jsp?year=1995&make=AU&model=S6--001&category=All&part=Strut%20Mount&dp=true>http://oem.thepartsbin.com/parts/thepartsbin/wizard.jsp?year=1995&make=AU&model=S6--001&category=All&part=Strut%20Mount&dp=true
>
>Do you have the tools??
>
>Eric 95 S6. (18 inch Avus, SP 9000's, Big Reds, Chip, Digital Boost Ga.)
>

-Peter Schulz
Chelmsford Ma, USA
http://www.naaclub.org/

1995.5 S6 Emerald/Ecru
1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica (for Sale)
1991 90 20v Q Red

1990 CQ silver
1991 CQ silver  (eS2 recipient)
1990 CQ red (buyer found)