[s-cars] urS4 chipped boost level?

[Martin Baggenstos]

Hello Cody,

  I have a 95 urS6 with the Rs2 setup and have the MRC Rs2 software with the
chip for my FMIC and delphi 37lbs injectors and stock MAF instead of the RS2
injectors and MAF. I also have placed a 1.7bar spring in the wastegate and
put in manual boost  controller in parallel to control boost spikes. I have
it set to 28psi peak and can maintain about  ~24-25 psi all the way through
the rpm band with no problems on 93 octane pump gas.

Martin



On 11/17/06, Tony Curran <tony.curran at sympatico.ca> wrote:
>
> Hi Cody,
>
> I have MRC Stage 2 and have tweeked my air intake and have seen peak of
> 27psi - haaven't done that too often, mind you.
>
> Tony
> 96 S6
>
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of cody at 5000tq.com
> Sent: November 15, 2006 1:22 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] urS4 chipped boost level?
>
>
> What boost level do the chippers commonly go to on an urS4? I guess
> MRC to be a bit specific, but a broad knowledge wouldn't hurt ;-). I'm
> looking at some compressor maps trying to ick which way to go with the
> '93 project car here. The current plan is exceptionally mild (owners
> choice, not mine!), hes thinking MRC stage 1 or such. The stock turbo
> is shot, so we are trying to decide to rebuild or not, and I've got a
> dozen compreessor maps in front of me :-).
>
>
> -Cody
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>