[s-cars] Clutch bleed screw - I'm a dingus.

[Mark Pollan]

Not a dingus at all as that thing is a son-of-a-__________ to see.  Even
after you know where it is you will have to look around a bit to see it the
next time you go there.  To add to Igor's description, on the driver's side
go about 4 inches aft from the driveshaft and follow that "line" around and
up the housing.  You will soon run into the kinked line and should see the
bleeder valve within 1 or 2 inches.

Regards,

Mark

P.S.  Sorry I'm not a digital kind of guy.

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Igor Kessel
Sent: Monday, September 18, 2006 2:41 PM
To: Eric Phillips
Cc: s-car-list at audifans.com
Subject: Re: [s-cars] Clutch bleed screw - I'm a dingus.

Eric Phillips wrote:
> Guys:
> 
> I can't find the damn thing.  I keep thinking that I'm not looking in
> the proper place, or maybe it's hidden, and I have to be at the proper
> angle...
> 
> Could someone please either thoroughly describe it's location, or
> provide a picture of where the damn thing is?
> 
> I truly just want to bleed my clutch...
> 
> TIA,
> 
> Eric.
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 

Eric,
It's by the kink in the hard line to the slave, covered by the rubber 
cap. Very difficult to reach. I use a slightly bent box end 11m wrench. 
Sometimes I really love those Chinese-made wrenches.

-- 
Igor Kessel
two turbo quattros
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list