[s-cars] Head light multi-function swithc

[Jerry Scott]

It can take a while for the high current at the switch to do its damage. 
If you are running higher than stock wattage on the bulbs, the switch 
will eventually burn out. You will also burn the reflectors inside the 
lamp assembly. Consider going to an after market HID set up for the low 
beams and Tosheba 9011 bulbs for the high beam.
Jerry

rjbarry at verizon.net wrote:

>I have had a problem over the last year or so with my headlight switch. I’ve had it replaced three times now. The problem is either the lights only work in high beam mode or the high beams come on when I use the turn signal for left turns. With the last switch replacement, the wiring harness was burned on a couple of the pins and was replaced. Could this problem be coming from my european hella lights and if so, would wiring relay alleviate this problem? I had the lights switched at least two years ago, meaning I had no problems for at least a year.
>
> 
>
>Thanks.
>
>
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>
>
>  
>