[s-cars] dead pig update
Mark Strangways
StrangConst at rogers.com
Fri Apr 20 15:35:20 EDT 2007
That would be a balance weight
----- Original Message -----
From: <cody at 5000tq.com>
To: <DGraber460 at aol.com>
Cc: <wmahoney at disk.com>; <s-car-list at audifans.com>; <StrangConst at rogers.com>
Sent: Friday, April 20, 2007 12:23 PM
Subject: Re: [s-cars] dead pig update
>
>> There was / is a pin on the flywheel to indicate TDC.
>> If it's missing, no start...
>>
>> Don't even ask me how I know...
>>
>
> I've got an urS4 on my lift right now which had a metal rectangular
> shaped "something" come loose of the flywheel. I say "something"
> because there is some debate as to if it is purely a ballance weight,
> or if it is what the TDC sensor uses to generate it's signal. It is
> very clear that it used to be welded to the flywheel, no clue how it
> came off. Any way arround it when the "something" came off of the
> flywheel it damaged one of the referance sensors and in the end wedged
> between the starter and the ring gear, seizing the engine.
>
> Bottom line: If theres no signal from the sensor make sure whatever
> pickup is still there. It seems that a somewhat scary number of people
> have experianced failure of the pickup.
>
> -Cody Forbes
> http://www.5000tq.com
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
More information about the S-CAR-List
mailing list