[s-cars] 93 S4 X-Plug

[Mark Pollan]

I used the hydraulic fluid to lubricate the o-ring nearly one year ago and
have no leaks but that uniqueness is what in part makes our urS so
//Special.  When you remove the plug be aware there is a spring loaded
plunger like thingamajig in there that might fire off to the nether regions
of your work area.

Regards,

mark

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Peter Schulz
Sent: Thursday, April 26, 2007 12:57 PM
To: Tom Green; s-car-list at audifans.com
Cc: yellowcuda at gmail.com
Subject: Re: [s-cars] 93 S4 X-Plug

Tom:

Nooooo....
Pentosin hydraulic fluid WON"T be sufficient for lubricating the O 
ring, it will still deform, crush and allow fluid to leak.
Use grease instead....

BTDT....

-Peter



At 12:45 PM 4/26/2007 -0400, Tom Green wrote:
>Let's don't make this difficult.  The plug simply fills a hole,  and
>the holes are all the
>same.  I don't think there is a S4/6 part number, but be assured the
>plug fits the hole.
>Would audiworld lead you astray?
>Since you are replacing this plug you must have a ready supply of
>hydraulic fluid to
>lubricate the o-ring for installation.  :-)
>
>Tom
>

-Peter Schulz
Chelmsford Ma, USA
http://www.naaclub.org/

1995.5 S6 Avant Emerald/Ecru
1995.5 S6 Avant Silver/Platinum

1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica (for Sale)
1991 90 20v Q Red
1991 CQ silver  (eS2 recipient) 

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list