[s-cars] BIRA.ORG ?

[Pasqualoni, James E]

And this:  http://pictureposter.audiworld.com/68383/s6_front-left.jpg 

-----Original Message-----
From: Pasqualoni, James E 
Sent: Friday, August 10, 2007 3:20 PM
To: 'Mike Fitton'
Cc: Mark Pollan; s-car-list at audifans.com
Subject: RE: [s-cars] BIRA.ORG ?

My former Avant with BBK and 15mm spacers:

http://pictureposter.audiworld.com/68383/s6_rear-left.jpg 

-----Original Message-----
From: Mike Fitton [mailto:rfitton at vt.edu]
Sent: Friday, August 10, 2007 3:18 PM
To: Pasqualoni, James E
Cc: Mark Pollan; s-car-list at audifans.com
Subject: Re: [s-cars] BIRA.ORG ?

Ooohoooohooooooo, neat.  I will bear that in mind.  Uhh, anyone want a
set of 928GTS calipers with about 4 months of use on them?

-Cheers!
Mike

Pasqualoni, James E wrote:
> The 130mm monoblocs will, however, fit the oe Avus wheels with 15mm 
> spacers.
>
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Mike Fitton
> Sent: Friday, August 10, 2007 2:36 PM
> To: Mark Pollan
> Cc: s-car-list at audifans.com
> Subject: Re: [s-cars] BIRA.ORG ?
>
> RS2 brackets are 130mm pattern.  The old 993tt Brembos, some of the 
> older 2-piece Brembos from the 90s, and most of the 996 and 986 
> (except higher end 996 like 996tt, 996GT3, and maybe 996C4S) will fit
them.
> Hottest ticket with the RS2 brackets is probably the 996 C2S caliper 
> or the 986 S caliper (which might be the same), assuming offsets and 
> junk can be worked out.  Afaik, none of the 130mm monoblocs will fit 
> under the stock S6 Avus wheels.
>
> -Cheers!
> Mike
>
> Mark Pollan wrote:
>   
>> Hi Shawn:
>>
>> I have a set of RS2 brackets that I purchased from Javad at 034.  I 
>> can mic them unless you know what spacing they offer.  These have 
>> never been installed.
>>
>> Mark
>>
>> -----Original Message-----
>> From: s-car-list-bounces at audifans.com 
>> [mailto:s-car-list-bounces at audifans.com] On Behalf Of 
>> ELLIEOLSEN at aol.com
>> Sent: Friday, August 10, 2007 1:23 PM
>> To: s-car-list at audifans.com
>> Subject: [s-cars] BIRA.ORG ?
>>
>> Questions,
>> So I have these nice 996 turbo calipers, 993tt 322/32mm rotors  that 
>> I
>>     
>
>   
>> need hats and brackets for to fit my S6 . I was planing on getting 
>> this through BIRA.ORG (Stage 6), but I am not able to contact them 
>> (Greg and Greg) via their email addresses at Bira.org...
>>  
>> 1) Does that mean that the Organization is no longer providing the
>>     
> services?
>   
>>  
>> 2) Does anyone have a set of Brackets that have 142mm spcing not the 
>> more standard 130mm??
>>  
>> 3) Hats for the 993tt anyone.
>>  
>> Regards,
>>  
>> Shawn
>>  
>>
>>
>>
>> ************************************** Get a sneak peek of the 
>> all-new
>>     
>
>   
>> AOL at http://discover.aol.com/memed/aolcom30tour
>> _______________________________________________
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
>> http://www.audifans.com/mailman/listinfo/s-car-list
>>
>>
>> _______________________________________________
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
>> http://www.audifans.com/mailman/listinfo/s-car-list
>>
>>   
>>     
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
>