[s-cars] BIRA.ORG ?

[Steve Powers]

I believe the 996 calipers mount radially. The 993, e.g. on RS2
brackets, calipers do not. Even if they had the same bolt spacing,
there's the small matter of a 90-degree bend...

Steve

On 8/10/07, Lee Levitt <lee at wheelman.com> wrote:
> Will the RS2 brackets locate 996 calipers properly on an A4?
>
> The car is silver, if that makes a difference.
>
> Thanks!
>
> Lee
> '01 A4 1.8t quattro avant
> '99 A6 quattro avant
> '97 A6 quattro avant
> '96 A6 quattro avant
>
>
>
> On Fri Aug 10 11:35:46 PDT 2007, Mike Fitton <rfitton at vt.edu>
> wrote:
>
> > RS2 brackets are 130mm pattern.  The old 993tt Brembos, some of
> > the older 2-piece Brembos from the 90s, and most of the 996 and
> > 986 (except higher end 996 like 996tt, 996GT3, and maybe 996C4S)
> > will fit them.  Hottest ticket with the RS2 brackets is probably
> > the 996 C2S caliper or the 986 S caliper (which might be the
> > same), assuming offsets and junk can be worked out.  Afaik, none
> > of the 130mm monoblocs will fit under the stock S6 Avus wheels.
> >
> > -Cheers!
> > Mike
> >
> > Mark Pollan wrote:
> >> Hi Shawn:
> >>
> >> I have a set of RS2 brackets that I purchased from Javad at 034.
> >>  I can mic
> >> them unless you know what spacing they offer.  These have never
> >> been
> >> installed.
> >>
> >> Mark
> >>
> >> -----Original Message-----
> >> From: s-car-list-bounces at audifans.com
> >> [mailto:s-car-list-bounces at audifans.com] On Behalf Of
> >> ELLIEOLSEN at aol.com
> >> Sent: Friday, August 10, 2007 1:23 PM
> >> To: s-car-list at audifans.com
> >> Subject: [s-cars] BIRA.ORG ?
> >>
> >> Questions,
> >> So I have these nice 996 turbo calipers, 993tt 322/32mm rotors
> >> that I need hats and brackets for to fit my S6 . I was planing
> >> on getting this through BIRA.ORG (Stage 6), but I am not able to
> >> contact them (Greg and Greg) via
> >> their email addresses at Bira.org...
> >>  1) Does that mean that the Organization is no longer providing
> >> the services?
> >>
> >>  2) Does anyone have a set of Brackets that have 142mm spcing
> >> not the more standard 130mm??
> >>  3) Hats for the 993tt anyone.
> >>  Regards,
> >>  Shawn
> >>  ************************************** Get a sneak peek of the
> >> all-new AOL
> >> at http://discover.aol.com/memed/aolcom30tour
> >> _______________________________________________
> >> S-CAR-List mailing list
> >> S-CAR-List at audifans.com
> >> http://www.audifans.com/mailman/listinfo/s-car-list
> >>
> >>
> >> _______________________________________________
> >> S-CAR-List mailing list
> >> S-CAR-List at audifans.com
> >> http://www.audifans.com/mailman/listinfo/s-car-list
> >>
> >>
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
> >
> >
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
>