[s-cars] Instrument Cluster Switches

[Taka Mizutani]

It should be explained in the Bentley, but the different positions have to
do with metric vs. imperial readout, there is also a mileage adjustment for
something like 0, 5 and 10 percent adjustment for the trip computer.

Taka


On 8/11/07, calvinlc at earthlink.net <calvinlc at earthlink.net> wrote:
>
> Don't think so.  One of the switches says Diesel at one end of travel and
> Benzin at the other end of travel and has 6 total positions.  If it was
> just
> two then I would think it was to select between diesel and gasoline....but
> why the 6 positions?
> --Calvin
>
>
> -----Original Message-----
> From: Steve Powers [mailto:sbpowers at gmail.com]
> Sent: Saturday, August 11, 2007 4:03 PM
> To: calvinlc at earthlink.net; s-car-list at audifans.com
> Subject: Re: [s-cars] Instrument Cluster Switches
>
>
> Speedometer calibration?
>
> Steve Powers
>
>
> On 8/11/07, calvinlc at earthlink.net <calvinlc at earthlink.net> wrote:
> > Anybody know what the two switches are for in the back of the instrument
> > cluster?  One is a DIP switch with 3 switches and one is a single slide
> > switch with about 5 positions to it.  For some reason, it has always
> > bothered me not knowing what they are :)
> > --Calvin
> >
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
> >
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>