[s-cars] Bosch Icon wiper blades...wiper blades (sing along)

[chris chambers]

I inspected my driver's side wiper arm and sure enough there is a nice
gentle curve in the cast aluminum portion of the arm. I then removed
the arm and with the arm off the car the bend was even more evident!

Using a vice I carefull removed the curve (or most of it) and
reinstalled the arm on my car. Total amount of time was less than
10 minutes.

Final results, with the worn stock wiper blade it's definitely
wiping better and contacting the entire windshield. Now I guess it's
time to try new wiper blades...question is should they be 
the Bosch Icons?

Right now I'm leaning towards the Bosch Icons.

Thanks all for your input, looks like everyone should inspect
their wiper arms and see if they have bent arms.


--- Tim Leonard <nard1 at cablespeed.com> wrote:

> I have seen this problem on several S-cars. The cure is to remove the
> wiper 
> arm, place in a vice with soft jaws and CAREFULLY/SLIGHTLY bend the
> arm back 
> to it's original shape. I'm talking about the cast aluminum portion
> of the 
> arm. Clamp it in the vice where the wiper linkage shaft would insert,
> then 
> push it to a straighter position to remove some of the bow. I suspect
> this 
> portion of the arm gets bent when the wipers are turned on when the
> blades 
> are frozen to the windshield.
> Hope this helps.
> Tim Leonard
> Audiwerke
> Michigan
> ----- Original Message ----- 
> From: "chris chambers" <fastscirocco_2000 at yahoo.com>
> To: "Scar" <s-car-list at audifans.com>
> Sent: Wednesday, January 31, 2007 5:44 PM
> Subject: [s-cars] Bosch Icon wiper blades...wiper blades (sing along)
> 
> 
> > So, driving home last night on I-94 I through a terrible
> > lake effect snow squall at speeds as low as 15 mph I
> > decided it was time for new wiper blades.
> >
> > Remembering the threads earlier of the Bosch Icon blades I
> > stopped by Autozone and purchased one 422A and one 422B.
> > Installed said blades with the 422A on driver's side and
> > 422B on passenger's side (redundant info huh?)
> >
> > Man am I disappointed..upon testing (in the driveway)
> > the driver's side didn't wipe away any windshield washer fluid at
> all!
> > In fact the 2 year old stock blade did a better job of
> > wiping on the driver's side. Now the passenger's side did fine,
> > but that really doesn't help much.
> >
> > I've returned the Icons and have decided to poll the list to
> > see whats what.
> >
> > If you have said Icons, do they work well for you?
> >
> > Is it possible I just need to "retension" the spring on the
> > driver's side...could the Icons be more sensitive to spring
> > tension then the stock blades?
> >
> > Any and all input would be greatly appreciated...
> >
> >
> > Chris
> >
> >
> >
> > Make April 15th just another day http://www.fairtax.org
> >
> >
> >
> >
> >
>
____________________________________________________________________________________
> > Don't pick lemons.
> > See all the new 2007 cars at Yahoo! Autos.
> > http://autos.yahoo.com/new_cars.html
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list 
> 
> 


Make April 15th just another day http://www.fairtax.org



 
____________________________________________________________________________________
Sucker-punch spam with award-winning protection. 
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/features_spam.html