[s-cars] Fender liner venting

LL - NY larrycleung at gmail.com
Thu Feb 15 10:38:11 EST 2007


I found that a Home Depot 4" diameter duct vent ($2.89) seems to work just
fine.

LL - NY

On 2/15/07, Harold McComas <HaroldMcComas at comcast.net> wrote:
>
> Although I haven't really looked at it too much, another donor possibility
> is the New Beetle 1.8T.
>
> Harold M
> 96 S6
>
> > From: "Cody Forbes" <cody at 5000tq.com>
> > Subject: [s-cars] Fender liner venting
> > To: "audi s-cars list" <s-car-list at audifans.com>
> > Cc: quattro at audifans.com
> > Message-ID: <001201c750a6$5fac7780$6401a8c0 at nuvolari>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Last week there was some talk on one of the urS list about fender liner
> > venting for the IC, and the use of later S4 fender liners for donor
> > louvers. While doing a T-belt on a TT today I noticed that it has a
> > promising looking vent in the passenger side fender liner. The talk
> > mentioned how the vented section of S4 fender liner had to be
> extensively
> > modified to work right (cut shorter, and one row wide IIRC). The TT vent
> > is much narrower then the S4 vent used, and also shaped in a way that
> may
> > permit it being used without any mods at all. I didn't get a picture,
> > sorry :-(.
> >
> > Just wanted to throw that out there for you guys to chew on! Maybe a TT
> > owner on the list could get a photo to share?
> >
> > -Cody Forbes
> > http://www.5000tq.com
> > '86 5k noT noQ
> > '86 5k noT noQ - Parting Out
> > '87 5ktq
> > '87 5ktq - Fast. Really Fast.
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>


More information about the S-CAR-List mailing list