[s-cars] HVAC Temp Fix Question

[Douglas Fifield]

Thanks to all who have replied.

Since I don't have a replacement motor or position sensor handy, is
this repairable, or simply something that needs to be replaced?

D.

On 1/3/07, Harold McComas <HaroldMcComas at comcast.net> wrote:
> Hi Douglas:
>
> The info you want is here:
> http://www.audifans.com/twiki/bin/view/Audi/ServoMotorC4
>
> Real easy fix.  While the wiper assembly is out lube the pivot points, cured
> my squeaking problem.
> When I swapped out the temp flap motor I used a babelfish translation of a
> Russian page as that was all that I could find at the time.
> From the Audiworld  100/A6 (C4) forum FAQ thread, :
> http://www.audi.auto.ru/climate/temp_flap_repair/temp_flap.htm
>
> Harold in NH with no snow
> 96 S6
>
> > From: "Douglas Fifield" <douglas.fifield at gmail.com>
> > Subject: [s-cars] HVAC Temp Fix Question
> > To: Scar <s-car-list at audifans.com>
> > Message-ID:
> > <fb4d2bb0701021109q77769f68o52eff7f7715f697a at mail.gmail.com>
> > Content-Type: text/plain; charset=UTF-8; format=flowed
> >
> > Hedz,
> >
> > Now that we finally have a little snow here and sub-zero temps, my
> > temp control functionality has taken a vacation.  I recently noticed
> > that the temp output is flaky.  A while back it seemed to get stuck on
> > full hot.  Today, full cold.
> >
> > Channel 1 on the HVAC system diagnostics shows a reading of 8.5 which
> > appears to indicate a "Temperature regulator flap motor position
> > sensor -G92-, malfunction" according to the Bentley.
> >
> > The temp dash gage reads normal and channel 51 on HVAC diagnostics
> > displays 85-87.
> >
> > So, I assume the temp flap position sensor needs work.  Where is it
> > and how do I get at it.
> >
> > Any helpful suggestions out there?
> >
> > D. (shivering)
> >
> > --
> > Douglas in MN
> > 95.5 Audi S//6 Avant
> > 73 BMW R60/5 mit Toaster Tank
>
>
>


-- 
Douglas in MN
95.5 Audi S//6 Avant
73 BMW R60/5 mit Toaster Tank