[s-cars] Belly pan blues (95 S6A)
Ian Duff
iduff at comcast.net
Thu Jan 11 10:11:11 EST 2007
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
I have the belly pan off my S6A right now, let me know where to send
pictures, and what angles to take the pictures from, and I'll send
you some today.
- -Ian Duff.
On 11 Jan 2007, at 9:51:20AM, Mark Rivera wrote:
> Does anyone have a good pic of the belly pan? Robert, I'm sure
> something
> could be done for clearance, so long as everyone with a FMIC had
> the same
> issue. My guess would be that the pans would be made to fit an
> unmodified
> car, and folks could trim and make minor adjustments as necessary.
> The
> material will surely be relatively thin gauge aluminum, so
> modifications
> would be simple with a pair of tin snips...
>
> Mark
> -----Original Message-----
> From: Robert Myers [mailto:robert at s-cars.org]
> Sent: Thursday, January 11, 2007 9:39 AM
> To: hoog23 at aol.com; mrivera at webcats.net; s-car-list at audifans.com
> Subject: Re: [s-cars] Belly pan blues (95 S6A)
>
>
>
> If sheet metal belly pans are developed let me suggest at least
> one change
> in the basic pattern. Provide a trap door through which the oil
> filter can
> be changed and oil can be drained from the engine. That would also
> require
> some sort of fastener to keep the door closed. Hinges and a screw
> or two?
>
> Also, at least in my case, there is a piece of pipe for my FMIC
> which
> drops a little below the "plane" of the belly pan near the horn.
> It would
> be helpful to have some simple direct method of accommodating such
> variations.
>
> At 09:20 AM 1/11/2007, hoog23 at aol.com wrote:
>
> *This message was transferred with a trial version of
> CommuniGate(tm)
> Pro*
> I got a slightly damaged clean one that could be used as a 'mold.'
>
> I think it lasted about 2 weeks before my wife took it out. I
> ended up
> putting my original back on with zip ties.
>
>
> -----Original Message-----
> From: mrivera at webcats.net
> To: s-car-list at audifans.com
> Sent: Thu, 11 Jan 2007 8:53 AM
> Subject: Re: [s-cars] Belly pan blues (95 S6A)
>
>
> Speaking of a sheetmetal replacement, does anyone offer these?
> I might
> be
> willing to have some made here through work if there's enough
> interest.
> We
> could maybe set it up as a group buy. The UrS4 I bought a few
> months
> ago
> didn't have one, and I'd really like to make one instead of
> paying a
> small
> fortune for a piece of plastic. We even have louvering
> capabilities
> here,
> so the sky's the limit so far as design goes. I just don't
> have a part
> to
> start with..... Anyone willing to help? I'm sure you all have
> ideas
> how
> you'd improve the factory piece...
>
> Mark
>
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [ mailto:s-car-list-bounces at audifans.com]On Behalf Of
> calvinlc at earthlink.net
> Sent: Thursday, January 11, 2007 12:17 AM
> To: Tom Winter; s-car-list at audifans.com
> Subject: Re: [s-cars] Belly pan blues (95 S6A)
>
>
> After the first time that I had to take it off and put it on to
> change
> the
> oil, it never went back on again. That was 83k miles ago...and
> I live
> in
> the Denver area as well. The only adverse thing that I know of
> that is
> quantifiable is that you don't get very good cooling from the
> intercooler
> with it off, lose a little power. I have been meaning to make
> a sheet
> of
> sheet metal that just covers up the intercooler area but I just
> haven't
> gotten around to it yet.
> --Calvin
>
>
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [ mailto:s-car-list-bounces at audifans.com]On Behalf Of Tom Winter
> Sent: Wednesday, January 10, 2007 7:21 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] Belly pan blues (95 S6A)
>
>
> Well, I had a belly pan. But it must have gotten ripped right
> off the
> car by
> some of the deep, icy ruts we have here in Colorado. Ya woulda
> thunk
> that I
> would have noticed some sort of sound, but, nope. Gotta turn
> down the
> tunes,
> I suppose.
>
> It will be easier to change the oil this weekend with the bastard
> already
> torn off, but I'd like to replace it.
>
> First, though, any problems if I don't? (aside from the obvious
> dirt and
> other junk spraying up into the engine compartment) I've got a
> bunch of
> travel coming up and there's no way to deal with it
> immediately. No time
> at
> all. . .
>
> And, what might I expect to pay for such an important part? I
> suppose
> that
> similar year A6's will be the same (like 95s and 96s?). Me
> thinks that
> it
> will be easier for me to source a used one from an A6 in these
> parts.
>
> And, if you live in these parts, (Colorado front range/I-70
> corridor to
> Aspen) and have a used one, whatcha want for it?
>
> Thanks in advance, all.
>
> Tom
> 95 S6 Avant
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
> ______________________________________________________________________
> __
> Check out the new AOL. Most comprehensive set of free safety and
> security tools, free access to millions of high-quality videos from
> across
> the web, free AOL Mail and more.
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
-----BEGIN PGP SIGNATURE-----
Version: PGP Desktop 9.5.1 (Build 1557)
Charset: US-ASCII
wsBVAwUBRaZTkQbfJQrv0DtCAQimuwgA1H70wt2hKaWfKL6iYb5uDMwaggwQqMcI
rshajR8y9MzWs6KGd1wd1THF0De1BmjJXOXjs/Ezijn0NfPNd9I32AYql8CSG0X6
RVJahfD3goGwzP71115piyXTRNZH9nirDwodXVSVq+Am8z9S9IsuuWYQOFk2r77N
2v4+3Q23k6hcUtrCNK4oPpUat13VGV8p9VKnHJd7NKNeMCwg43T3ucLWLoLYEovh
xjt0aaurPY3ijNyZAE89TwKYim4c62ylAA+9b5VFAlhZFGyp60SbEihLL9M9vQf6
8o+6jl2dVDo4DNSlwvNzEIJdKqWf2pqvW+tuhHIq5iGymf9w9xSlWw==
=iXI7
-----END PGP SIGNATURE-----
More information about the S-CAR-List
mailing list