[s-cars] overboost

[Vincent Frégeac]

I've no BTDT in modded cars but my first suspicion when something with
electricity goes wrong in an Audi is: Bad electrical contact? Pressure
sensor (VMAP or any other one) was disturbed during the MTM 1+ install then,
all of a sudden, the S-bitch way, i.e. preferably when you really don't want
anything to happen like 80mph+ on snow, the boost sensor decided to create
some resistance at the contact points (the ECU would probably have sense an
open circuit and gone valet mode, and weak solder joint frequently creates
resistance - and capacitance we don't really care in that case - with
vibration) just thinking it would be a good way to make you loose control
while doing 80mph on snow. Hopefully, S-Car listers have their own way to
fight the S-bitch way and you tamed the raging beast.

Or may be it's just I'm going paranoiac with the S-bitch having so much
imagination to create perpetual trouble.



Vincent.

-----Message d'origine-----
De : s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] De la part de Elijahallen92 at aol.com
Envoyé : 16 janvier 2007 18:14
À : s-car-list at audifans.com
Objet : [s-cars] overboost

Hey guys, just got the MTM 1+ chips in (thanks Chris) and I went for a
drive. The car is my wifes S6 that has the full RS2 setup minus the cams and
I put stock injectors in to run these chips and it pulled hard then, the
sudden forhead bashing overboost, didn't feel like a boost leak so I shut
the car off (while I was going 80mph testing) to see if it would return and
it didn't for a few hard boosts. The weather here isn't good for testing so
thats all I did since the roads are covered in snow :-) Any idea's.

Elijah
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list