[s-cars] RS2 EM installation...
Young, Steve
sryoung at trane.com
Mon Jan 22 12:40:49 EST 2007
Matt...
I always replace all gaskets.
Try ECS Tuning for a EM hardware kit. Dave Brown got them to make up a
couple within the last year. I traded my spare kit to Posto for a Stromung
Gen IV test pipe. (Thanks Posto, it's already on the car!) Kits run around
$150 if you can get one, and will include the required shortened studs for
the block. My original studs backed right out once double nutted. However,
my S4 had had the original studs shortened with a hacksaw. Not pretty, but
they worked. I replaced them anyway.
If you can't find a kit, I may have a couple of the expensive gaskets (read
$35-$40 each) that are spares and I could cut you a deal. I'll check if you
are interested.
The EM will ship later this week.
Regards,
TRANE
Steven Young
Local Operations Manager
Albany Office
-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Matthew Pelkey
Sent: Monday, January 22, 2007 12:17 PM
To: s-car-list
Subject: [s-cars] RS2 EM installation...
Hi Folks,
I was wondering if someone has a set of the "special" wrenches I can borrow
for the RS2 EM installation for a couple weeks?
I'm also curious if any of the hardware and gaskets can be re-used or if
it's just a good idea to replace it anyways.
Thanks,
Matt
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-CAR-List
mailing list