[s-cars] Swapping '92 or 93 S4 trans into '95 S6

[Fred Munro]

The UrS4 tranny is a bolt-in. It will have a ProConTen bracket that you
won't need on the S6 (unless you have an early '95);the S6 used explosive
reels on the seatbelts rather than the ProConTen cable system.
DO replace the input shaft seal,the halfshaft seals, and the rear seal while
you have the S4 tranny on the floor.

HTH

Fred Munro
'97 S6

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]On Behalf Of Azeem Elahi
Sent: July 6, 2007 12:16 PM
To: s-car-list at audifans.com
Subject: [s-cars] Swapping '92 or 93 S4 trans into '95 S6


My '95 S6 has the horrible first gear whine, and I'm planning on swapping it
out in favour of a good condition (no whine) '92 or '93 S4 transmission.  Is
there anything I should know beforehand?  Any pointers?  Any DOs or DON'Ts?

Any help/advise would be appreciated.

Thanks,
-Azeem
'95 S6
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list