[s-cars] FW: Additional input to the conversation on BBK'sandbrackets....
Sean Douglas
s_douglas at telus.net
Mon Jul 23 22:00:19 EDT 2007
Steve:
Bentley is confusing on this because it shows either the standard single
piston calipers for the 100/A6 or the fancier 4 piston calipers found on the
euro-spec S6. Oddly, it does not show the Girling 2 piston calipers that are
stock on US-spec cars.
For the A6/100, Bentley says 92 ft lbs for the carrier to the strut bolts.
I'm assuming the bolt is the same on the US-spec S4/S6. These are M12x1.5
grade 10.9 IIRC. My handy dandy torque chart shows a recommended torque
value of 125 Nm (92 ft-lbs). Torquing these to 148 ft-lbs is way too high
and 60 is too low. Even 12.9 grade is 145 Nm for a M12 bolt.
I'd re-torque those to 92.
Sean Douglas
> -----Original Message-----
> From: s-car-list-bounces at audifans.com [mailto:s-car-list-
> bounces at audifans.com] On Behalf Of Young, Steve
> Sent: July 23, 2007 4:46 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] FW: Additional input to the conversation on
> BBK'sandbrackets....
>
>
> I have just installed my StopTech kit. Engineering seemed quite well
> done, and everything installed as specified. The caliper brackets are
> aluminum, with steel pins that the caliper slides over. Attached are
> links to a couple pics in my AW picposter. StopTech says to torque the
> caliper bracket mounting bolts to 148 ftlbs, but IIRC Bentley says ~60
> ftlbs. Unfortunately, StopTech doesn't produce an installation manual
> specific to the C4 S-car, so they send you the manual for the B5 S4/C5
> A6 kit. I torqued mine to the factory spec, but haven't bled out the
> system or driven on the kit yet. Getting a torque wrench in there that
> will do 150 ftlbs will be near impossible. Will I be okay with the
> factory setting? Input is appreciated. TIA
>
> http://pictureposter.audiworld.com/87069/dscn0028.1.jpg
>
> http://pictureposter.audiworld.com/87069/dscn0027.jpg
>
> http://pictureposter.audiworld.com/87069/dscn0025.1.jpg
>
> Regards,
>
> TRANE
> Steven Young
> Local Operations Manager
> Albany Office
> * Tel. (518) 724-1453
> * Fax (518) 785-4359
> * sryoung at trane.com
>
> The contents of this e-mail and any attachments to it contain
> confidential and/or legally privileged information, which is only for
> the use of the intended recipient. If you have received this e-mail in
> error, please notify the sender by return e-mail immediately.
>
> Furthermore, if you are not the intended recipient, you are hereby
> notified that any disclosure, copying, distribution, or the taking of
> any action in reliance on the comments or the contained information
> included herein or attached hereto is strictly prohibited and that the
> documents should be returned to the sender immediately.
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-CAR-List
mailing list